Multibranch Support

README.md

@@ -1,3 +1,19 @@
-FF Königswinter Multidomain with Batman15 and 802.11s
+# ffkw
+FF Koenigswinter with Batman15 and 802.11s
 
-Please use the appropriate branch, depending on whether you want to use FastD or Wireguard.
+
+This is the stable site for Gluon 2019.1.x with wireguard.
+
+__Please remember:
+You could use Wireguard only for devices with more than 4Mb of Flash! That means, that f.e. the 841er can only connect to the mesh with fastd!__
+
+
+## Build Instructions
+
+1. Go in your build system with the user you want to build
+2. Download Gluon 2019.1.x You'll find the informations you'll need under the URL https://gluon.readthedocs.io/en/v2019.1.x/user/getting_started.html
+3. Create a directory *site* in your firmware-directory.
+4. Download this branch in this directory.
+5. Now run *make update*
+6. Everything should be complete now. You can start the compiling with the command *make GLUON_TARGET=ar71xx-tiny* or *make GLUON_TARGET=ar71xx-generic*
+7. If everything works you should find your files now in the directory *./output/images/*

domains/asbach.conf

@@ -0,0 +1,91 @@
+{   
+	domain_names = {     
+		asbach = 'Asbach'   
+	},
+
+	mesh = 
+	{       
+		vxlan = true,
+ 		batman_adv = {           
+			routing_algo = 'BATMAN_IV',       
+			gw_sel_class = 3,
+		},
+	},
+
+	-- Domain Seed
+		domain_seed = 'e0e05b36828f33c3e7f4946d5bd255358fcf36c4519d4d7698a97c2d16200095',
+
+	-- Prefixes used within the mesh. Both are required.
+		prefix4 = '10.80.0.0/16',
+		prefix6 = 'fdd3:5d20:b5dd:fe00::/64',
+
+	-- Wireless configuration for 2.4 GHz interfaces.
+	wifi24 = {
+		-- Wireless channel.
+	    	channel = 1,
+
+	    	-- ESSID used for client network.
+	    	ap = {
+	        	ssid = 'Freifunk-Asbach.de',
+	    	},
+	  	mesh = {
+	    		id = '02:d1:11:37:fd:49',
+	    		mcast_rate = 12000,
+	  	},
+	},
+	-- Wireless configuration for 5 GHz interfaces.
+	-- This should be equal to the 2.4 GHz variant, except
+	-- for channel and htmode.
+	wifi5 = {
+		channel = 44,
+		outdoor_chanlist = '100-140',
+		ap = {
+ 	     	  	ssid = 'Freifunk-Asbach.de',
+ 	   	},
+	  	mesh = {
+   	 		id = '02:d1:11:37:fd:69',
+   	 		mcast_rate = 12000,
+  		},
+	},
+
+	-- The next node feature allows clients to always reach the node it is
+	-- connected to using a known IP address.
+	next_node = {
+		name= { 'nextnode', 'nn' },
+	    	-- anycast IPs of all nodes
+	    	ip4 = '10.80.2.255',
+	    	ip6 = 'fdd3:5d20:b5dd:fe00::1',
+	    	--ip6 = 'fdff::ff',
+
+		-- anycast MAC of all nodes
+	    	mac = '16:42:ca:fe:be:ef',
+	},
+
+	  -- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
+	  -- what these options do.
+
+        mesh_vpn = {
+                mtu = 1420,
+                wireguard = {
+                        enabled = 'true',
+                        iface = 'mesh-vpn',
+                        iprange = '10.3', --must be a /16!!
+                        limit = '1', -- actually unused
+                        gretapip = '10.3.0.2',
+                        peers = {
+                                       {
+                                               publickey ='N9uF5Gg1B5AqWrE9IuvDgzmQePhqhb8Em/HrRpAdnlY=',
+                                               endpoint ='ffkwsn01.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='liatbdT62FbPiDPHKBqXVzrEo6hc5oO5tmEKDMhMTlU=',
+                                               endpoint ='ffkwsn02.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='xakSGG39D1v90j3Z9eVWzojh6nDbnsVUc/RByVdcKB0=',
+                                               endpoint ='ffkwsn03.freifunk-koenigswinter.de:30020',
+                                        },
+                        },
+                },
+        },
+}

domains/badhoenningen.conf

@@ -0,0 +1,91 @@
+{   
+	domain_names = {     
+		badhoenningen = 'Bad Hönningen'   
+	},
+
+	mesh = 
+	{       
+		vxlan = true,
+ 		batman_adv = {           
+			routing_algo = 'BATMAN_IV',       
+			gw_sel_class = 3,
+		},
+	},
+
+	-- Domain Seed
+		domain_seed = 'e0e05b36828f33c3e7f4946d5bd255358fcf36c4519d4d7698a97c2d16200095',
+
+	-- Prefixes used within the mesh. Both are required.
+		prefix4 = '10.80.0.0/16',
+		prefix6 = 'fdd3:5d20:b5dd:fe00::/64',
+
+	-- Wireless configuration for 2.4 GHz interfaces.
+	wifi24 = {
+		-- Wireless channel.
+	    	channel = 1,
+
+	    	-- ESSID used for client network.
+	    	ap = {
+	        	ssid = 'Freifunk-BadHoenningen.de',
+	    	},
+	  	mesh = {
+	    		id = '02:d1:11:37:fd:49',
+	    		mcast_rate = 12000,
+	  	},
+	},
+	-- Wireless configuration for 5 GHz interfaces.
+	-- This should be equal to the 2.4 GHz variant, except
+	-- for channel and htmode.
+	wifi5 = {
+		channel = 44,
+		outdoor_chanlist = '100-140',
+		ap = {
+ 	     	  	ssid = 'Freifunk-BadHoenningen.de',
+ 	   	},
+	  	mesh = {
+   	 		id = '02:d1:11:37:fd:69',
+   	 		mcast_rate = 12000,
+  		},
+	},
+
+	-- The next node feature allows clients to always reach the node it is
+	-- connected to using a known IP address.
+	next_node = {
+		name= { 'nextnode', 'nn' },
+	    	-- anycast IPs of all nodes
+	    	ip4 = '10.80.2.255',
+	    	ip6 = 'fdd3:5d20:b5dd:fe00::1',
+	    	--ip6 = 'fdff::ff',
+
+		-- anycast MAC of all nodes
+	    	mac = '16:42:ca:fe:be:ef',
+	},
+
+	  -- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
+	  -- what these options do.
+
+        mesh_vpn = {
+                mtu = 1420,
+                wireguard = {
+                        enabled = 'true',
+                        iface = 'mesh-vpn',
+                        iprange = '10.3', --must be a /16!!
+                        limit = '1', -- actually unused
+                        gretapip = '10.3.0.2',
+                        peers = {
+                                       {
+                                               publickey ='N9uF5Gg1B5AqWrE9IuvDgzmQePhqhb8Em/HrRpAdnlY=',
+                                               endpoint ='ffkwsn01.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='liatbdT62FbPiDPHKBqXVzrEo6hc5oO5tmEKDMhMTlU=',
+                                               endpoint ='ffkwsn02.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='xakSGG39D1v90j3Z9eVWzojh6nDbnsVUc/RByVdcKB0=',
+                                               endpoint ='ffkwsn03.freifunk-koenigswinter.de:30020',
+                                        },
+                        },
+                },
+        },
+}

domains/badhonnef.conf

@@ -0,0 +1,91 @@
+{   
+	domain_names = {     
+		badhonnef = 'Bad Honnef'   
+	},
+
+	mesh = 
+	{       
+		vxlan = true,
+ 		batman_adv = {           
+			routing_algo = 'BATMAN_IV',       
+			gw_sel_class = 3,
+		},
+	},
+
+	-- Domain Seed
+		domain_seed = 'e0e05b36828f33c3e7f4946d5bd255358fcf36c4519d4d7698a97c2d16200095',
+
+	-- Prefixes used within the mesh. Both are required.
+		prefix4 = '10.80.0.0/16',
+		prefix6 = 'fdd3:5d20:b5dd:fe00::/64',
+
+	-- Wireless configuration for 2.4 GHz interfaces.
+	wifi24 = {
+		-- Wireless channel.
+	    	channel = 1,
+
+	    	-- ESSID used for client network.
+	    	ap = {
+	        	ssid = 'Freifunk-BadHonnef.de',
+	    	},
+	  	mesh = {
+	    		id = '02:d1:11:37:fd:49',
+	    		mcast_rate = 12000,
+	  	},
+	},
+	-- Wireless configuration for 5 GHz interfaces.
+	-- This should be equal to the 2.4 GHz variant, except
+	-- for channel and htmode.
+	wifi5 = {
+		channel = 44,
+		outdoor_chanlist = '100-140',
+		ap = {
+ 	     	  	ssid = 'Freifunk-BadHonnef.de',
+ 	   	},
+	  	mesh = {
+   	 		id = '02:d1:11:37:fd:69',
+   	 		mcast_rate = 12000,
+  		},
+	},
+
+	-- The next node feature allows clients to always reach the node it is
+	-- connected to using a known IP address.
+	next_node = {
+		name= { 'nextnode', 'nn' },
+	    	-- anycast IPs of all nodes
+	    	ip4 = '10.80.2.255',
+	    	ip6 = 'fdd3:5d20:b5dd:fe00::1',
+	    	--ip6 = 'fdff::ff',
+
+		-- anycast MAC of all nodes
+	    	mac = '16:42:ca:fe:be:ef',
+	},
+
+	  -- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
+	  -- what these options do.
+
+        mesh_vpn = {
+                mtu = 1420,
+                wireguard = {
+                        enabled = 'true',
+                        iface = 'mesh-vpn',
+                        iprange = '10.3', --must be a /16!!
+                        limit = '1', -- actually unused
+                        gretapip = '10.3.0.2',
+                        peers = {
+                                       {
+                                               publickey ='N9uF5Gg1B5AqWrE9IuvDgzmQePhqhb8Em/HrRpAdnlY=',
+                                               endpoint ='ffkwsn01.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='liatbdT62FbPiDPHKBqXVzrEo6hc5oO5tmEKDMhMTlU=',
+                                               endpoint ='ffkwsn02.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='xakSGG39D1v90j3Z9eVWzojh6nDbnsVUc/RByVdcKB0=',
+                                               endpoint ='ffkwsn03.freifunk-koenigswinter.de:30020',
+                                        },
+                        },
+                },
+        },
+}

domains/buchholz.conf

@@ -0,0 +1,91 @@
+{   
+	domain_names = {     
+		buchholz = 'Buchholz'   
+	},
+
+	mesh = 
+	{       
+		vxlan = true,
+ 		batman_adv = {           
+			routing_algo = 'BATMAN_IV',       
+			gw_sel_class = 3,
+		},
+	},
+
+	-- Domain Seed
+		domain_seed = 'e0e05b36828f33c3e7f4946d5bd255358fcf36c4519d4d7698a97c2d16200095',
+
+	-- Prefixes used within the mesh. Both are required.
+		prefix4 = '10.80.0.0/16',
+		prefix6 = 'fdd3:5d20:b5dd:fe00::/64',
+
+	-- Wireless configuration for 2.4 GHz interfaces.
+	wifi24 = {
+		-- Wireless channel.
+	    	channel = 1,
+
+	    	-- ESSID used for client network.
+	    	ap = {
+	        	ssid = 'Freifunk-Buchholz.de',
+	    	},
+	  	mesh = {
+	    		id = '02:d1:11:37:fd:49',
+	    		mcast_rate = 12000,
+	  	},
+	},
+	-- Wireless configuration for 5 GHz interfaces.
+	-- This should be equal to the 2.4 GHz variant, except
+	-- for channel and htmode.
+	wifi5 = {
+		channel = 44,
+		outdoor_chanlist = '100-140',
+		ap = {
+ 	     	  	ssid = 'Freifunk-Buchholz.de',
+ 	   	},
+	  	mesh = {
+   	 		id = '02:d1:11:37:fd:69',
+   	 		mcast_rate = 12000,
+  		},
+	},
+
+	-- The next node feature allows clients to always reach the node it is
+	-- connected to using a known IP address.
+	next_node = {
+		name= { 'nextnode', 'nn' },
+	    	-- anycast IPs of all nodes
+	    	ip4 = '10.80.2.255',
+	    	ip6 = 'fdd3:5d20:b5dd:fe00::1',
+	    	--ip6 = 'fdff::ff',
+
+		-- anycast MAC of all nodes
+	    	mac = '16:42:ca:fe:be:ef',
+	},
+
+	  -- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
+	  -- what these options do.
+
+        mesh_vpn = {
+                mtu = 1420,
+                wireguard = {
+                        enabled = 'true',
+                        iface = 'mesh-vpn',
+                        iprange = '10.3', --must be a /16!!
+                        limit = '1', -- actually unused
+                        gretapip = '10.3.0.2',
+                        peers = {
+                                       {
+                                               publickey ='N9uF5Gg1B5AqWrE9IuvDgzmQePhqhb8Em/HrRpAdnlY=',
+                                               endpoint ='ffkwsn01.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='liatbdT62FbPiDPHKBqXVzrEo6hc5oO5tmEKDMhMTlU=',
+                                               endpoint ='ffkwsn02.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='xakSGG39D1v90j3Z9eVWzojh6nDbnsVUc/RByVdcKB0=',
+                                               endpoint ='ffkwsn03.freifunk-koenigswinter.de:30020',
+                                        },
+                        },
+                },
+        },
+}

domains/eitorf.conf

@@ -0,0 +1,91 @@
+{   
+	domain_names = {     
+		eitorf = 'Eitorf'   
+	},
+
+	mesh = 
+	{       
+		vxlan = true,
+ 		batman_adv = {           
+			routing_algo = 'BATMAN_IV',       
+			gw_sel_class = 3,
+		},
+	},
+
+	-- Domain Seed
+		domain_seed = 'e0e05b36828f33c3e7f4946d5bd255358fcf36c4519d4d7698a97c2d16200095',
+
+	-- Prefixes used within the mesh. Both are required.
+		prefix4 = '10.80.0.0/16',
+		prefix6 = 'fdd3:5d20:b5dd:fe00::/64',
+
+	-- Wireless configuration for 2.4 GHz interfaces.
+	wifi24 = {
+		-- Wireless channel.
+	    	channel = 1,
+
+	    	-- ESSID used for client network.
+	    	ap = {
+	        	ssid = 'Freifunk-Eitorf.de',
+	    	},
+	  	mesh = {
+	    		id = '02:d1:11:37:fd:49',
+	    		mcast_rate = 12000,
+	  	},
+	},
+	-- Wireless configuration for 5 GHz interfaces.
+	-- This should be equal to the 2.4 GHz variant, except
+	-- for channel and htmode.
+	wifi5 = {
+		channel = 44,
+		outdoor_chanlist = '100-140',
+		ap = {
+ 	     	  	ssid = 'Freifunk-Eitorf.de',
+ 	   	},
+	  	mesh = {
+   	 		id = '02:d1:11:37:fd:69',
+   	 		mcast_rate = 12000,
+  		},
+	},
+
+	-- The next node feature allows clients to always reach the node it is
+	-- connected to using a known IP address.
+	next_node = {
+		name= { 'nextnode', 'nn' },
+	    	-- anycast IPs of all nodes
+	    	ip4 = '10.80.2.255',
+	    	ip6 = 'fdd3:5d20:b5dd:fe00::1',
+	    	--ip6 = 'fdff::ff',
+
+		-- anycast MAC of all nodes
+	    	mac = '16:42:ca:fe:be:ef',
+	},
+
+	  -- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
+	  -- what these options do.
+
+        mesh_vpn = {
+                mtu = 1420,
+                wireguard = {
+                        enabled = 'true',
+                        iface = 'mesh-vpn',
+                        iprange = '10.3', --must be a /16!!
+                        limit = '1', -- actually unused
+                        gretapip = '10.3.0.2',
+                        peers = {
+                                       {
+                                               publickey ='N9uF5Gg1B5AqWrE9IuvDgzmQePhqhb8Em/HrRpAdnlY=',
+                                               endpoint ='ffkwsn01.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='liatbdT62FbPiDPHKBqXVzrEo6hc5oO5tmEKDMhMTlU=',
+                                               endpoint ='ffkwsn02.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='xakSGG39D1v90j3Z9eVWzojh6nDbnsVUc/RByVdcKB0=',
+                                               endpoint ='ffkwsn03.freifunk-koenigswinter.de:30020',
+                                        },
+                        },
+                },
+        },
+}

domains/erpel.conf

@@ -0,0 +1,91 @@
+{   
+	domain_names = {     
+		erpel = 'Erpel'   
+	},
+
+	mesh = 
+	{       
+		vxlan = true,
+ 		batman_adv = {           
+			routing_algo = 'BATMAN_IV',       
+			gw_sel_class = 3,
+		},
+	},
+
+	-- Domain Seed
+		domain_seed = 'e0e05b36828f33c3e7f4946d5bd255358fcf36c4519d4d7698a97c2d16200095',
+
+	-- Prefixes used within the mesh. Both are required.
+		prefix4 = '10.80.0.0/16',
+		prefix6 = 'fdd3:5d20:b5dd:fe00::/64',
+
+	-- Wireless configuration for 2.4 GHz interfaces.
+	wifi24 = {
+		-- Wireless channel.
+	    	channel = 1,
+
+	    	-- ESSID used for client network.
+	    	ap = {
+	        	ssid = 'Freifunk-Erpel.de',
+	    	},
+	  	mesh = {
+	    		id = '02:d1:11:37:fd:49',
+	    		mcast_rate = 12000,
+	  	},
+	},
+	-- Wireless configuration for 5 GHz interfaces.
+	-- This should be equal to the 2.4 GHz variant, except
+	-- for channel and htmode.
+	wifi5 = {
+		channel = 44,
+		outdoor_chanlist = '100-140',
+		ap = {
+ 	     	  	ssid = 'Freifunk-Erpel.de',
+ 	   	},
+	  	mesh = {
+   	 		id = '02:d1:11:37:fd:69',
+   	 		mcast_rate = 12000,
+  		},
+	},
+
+	-- The next node feature allows clients to always reach the node it is
+	-- connected to using a known IP address.
+	next_node = {
+		name= { 'nextnode', 'nn' },
+	    	-- anycast IPs of all nodes
+	    	ip4 = '10.80.2.255',
+	    	ip6 = 'fdd3:5d20:b5dd:fe00::1',
+	    	--ip6 = 'fdff::ff',
+
+		-- anycast MAC of all nodes
+	    	mac = '16:42:ca:fe:be:ef',
+	},
+
+	  -- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
+	  -- what these options do.
+
+        mesh_vpn = {
+                mtu = 1420,
+                wireguard = {
+                        enabled = 'true',
+                        iface = 'mesh-vpn',
+                        iprange = '10.3', --must be a /16!!
+                        limit = '1', -- actually unused
+                        gretapip = '10.3.0.2',
+                        peers = {
+                                       {
+                                               publickey ='N9uF5Gg1B5AqWrE9IuvDgzmQePhqhb8Em/HrRpAdnlY=',
+                                               endpoint ='ffkwsn01.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='liatbdT62FbPiDPHKBqXVzrEo6hc5oO5tmEKDMhMTlU=',
+                                               endpoint ='ffkwsn02.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='xakSGG39D1v90j3Z9eVWzojh6nDbnsVUc/RByVdcKB0=',
+                                               endpoint ='ffkwsn03.freifunk-koenigswinter.de:30020',
+                                        },
+                        },
+                },
+        },
+}

domains/koenigswinter.conf

@@ -0,0 +1,91 @@
+{   
+	domain_names = {     
+		koenigswinter = 'Königswinter'   
+	},
+
+	mesh = 
+	{       
+		vxlan = true,
+ 		batman_adv = {           
+			routing_algo = 'BATMAN_IV',       
+			gw_sel_class = 3,
+		},
+	},
+
+	-- Domain Seed
+		domain_seed = 'e0e05b36828f33c3e7f4946d5bd255358fcf36c4519d4d7698a97c2d16200095',
+
+	-- Prefixes used within the mesh. Both are required.
+		prefix4 = '10.80.0.0/16',
+		prefix6 = 'fdd3:5d20:b5dd:fe00::/64',
+
+	-- Wireless configuration for 2.4 GHz interfaces.
+	wifi24 = {
+		-- Wireless channel.
+	    	channel = 1,
+
+	    	-- ESSID used for client network.
+	    	ap = {
+	        	ssid = 'Freifunk-Koenigswinter.de',
+	    	},
+	  	mesh = {
+	    		id = '02:d1:11:37:fd:49',
+	    		mcast_rate = 12000,
+	  	},
+	},
+	-- Wireless configuration for 5 GHz interfaces.
+	-- This should be equal to the 2.4 GHz variant, except
+	-- for channel and htmode.
+	wifi5 = {
+		channel = 44,
+		outdoor_chanlist = '100-140',
+		ap = {
+ 	     	  	ssid = 'Freifunk-Koenigswinter.de',
+ 	   	},
+	  	mesh = {
+   	 		id = '02:d1:11:37:fd:69',
+   	 		mcast_rate = 12000,
+  		},
+	},
+
+	-- The next node feature allows clients to always reach the node it is
+	-- connected to using a known IP address.
+	next_node = {
+		name= { 'nextnode', 'nn' },
+	    	-- anycast IPs of all nodes
+	    	ip4 = '10.80.2.255',
+	    	ip6 = 'fdd3:5d20:b5dd:fe00::1',
+	    	--ip6 = 'fdff::ff',
+
+		-- anycast MAC of all nodes
+	    	mac = '16:42:ca:fe:be:ef',
+	},
+
+	  -- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
+	  -- what these options do.
+
+        mesh_vpn = {
+                mtu = 1420,
+                wireguard = {
+                        enabled = 'true',
+                        iface = 'mesh-vpn',
+                        iprange = '10.3', --must be a /16!!
+                        limit = '1', -- actually unused
+                        gretapip = '10.3.0.2',
+                        peers = {
+                                       {
+                                               publickey ='N9uF5Gg1B5AqWrE9IuvDgzmQePhqhb8Em/HrRpAdnlY=',
+                                               endpoint ='ffkwsn01.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='liatbdT62FbPiDPHKBqXVzrEo6hc5oO5tmEKDMhMTlU=',
+                                               endpoint ='ffkwsn02.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='xakSGG39D1v90j3Z9eVWzojh6nDbnsVUc/RByVdcKB0=',
+                                               endpoint ='ffkwsn03.freifunk-koenigswinter.de:30020',
+                                        },
+                        },
+                },
+        },
+}

domains/linz.conf

@@ -0,0 +1,91 @@
+{   
+	domain_names = {     
+		linz = 'Linz'   
+	},
+
+	mesh = 
+	{       
+		vxlan = true,
+ 		batman_adv = {           
+			routing_algo = 'BATMAN_IV',       
+			gw_sel_class = 3,
+		},
+	},
+
+	-- Domain Seed
+		domain_seed = 'e0e05b36828f33c3e7f4946d5bd255358fcf36c4519d4d7698a97c2d16200095',
+
+	-- Prefixes used within the mesh. Both are required.
+		prefix4 = '10.80.0.0/16',
+		prefix6 = 'fdd3:5d20:b5dd:fe00::/64',
+
+	-- Wireless configuration for 2.4 GHz interfaces.
+	wifi24 = {
+		-- Wireless channel.
+	    	channel = 1,
+
+	    	-- ESSID used for client network.
+	    	ap = {
+	        	ssid = 'Freifunk-Linz.de',
+	    	},
+	  	mesh = {
+	    		id = '02:d1:11:37:fd:49',
+	    		mcast_rate = 12000,
+	  	},
+	},
+	-- Wireless configuration for 5 GHz interfaces.
+	-- This should be equal to the 2.4 GHz variant, except
+	-- for channel and htmode.
+	wifi5 = {
+		channel = 44,
+		outdoor_chanlist = '100-140',
+		ap = {
+ 	     	  	ssid = 'Freifunk-Linz.de',
+ 	   	},
+	  	mesh = {
+   	 		id = '02:d1:11:37:fd:69',
+   	 		mcast_rate = 12000,
+  		},
+	},
+
+	-- The next node feature allows clients to always reach the node it is
+	-- connected to using a known IP address.
+	next_node = {
+		name= { 'nextnode', 'nn' },
+	    	-- anycast IPs of all nodes
+	    	ip4 = '10.80.2.255',
+	    	ip6 = 'fdd3:5d20:b5dd:fe00::1',
+	    	--ip6 = 'fdff::ff',
+
+		-- anycast MAC of all nodes
+	    	mac = '16:42:ca:fe:be:ef',
+	},
+
+	  -- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
+	  -- what these options do.
+
+        mesh_vpn = {
+                mtu = 1420,
+                wireguard = {
+                        enabled = 'true',
+                        iface = 'mesh-vpn',
+                        iprange = '10.3', --must be a /16!!
+                        limit = '1', -- actually unused
+                        gretapip = '10.3.0.2',
+                        peers = {
+                                       {
+                                               publickey ='N9uF5Gg1B5AqWrE9IuvDgzmQePhqhb8Em/HrRpAdnlY=',
+                                               endpoint ='ffkwsn01.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='liatbdT62FbPiDPHKBqXVzrEo6hc5oO5tmEKDMhMTlU=',
+                                               endpoint ='ffkwsn02.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='xakSGG39D1v90j3Z9eVWzojh6nDbnsVUc/RByVdcKB0=',
+                                               endpoint ='ffkwsn03.freifunk-koenigswinter.de:30020',
+                                        },
+                        },
+                },
+        },
+}

domains/neustadt.conf

@@ -0,0 +1,92 @@
+{   
+	domain_names = {     
+		neustadt = 'Neustadt'   
+	},
+
+	mesh = 
+	{       
+		vxlan = true,
+ 		batman_adv = {           
+			routing_algo = 'BATMAN_IV',       
+			gw_sel_class = 3,
+		},
+	},
+
+	-- Domain Seed
+		domain_seed = 'e0e05b36828f33c3e7f4946d5bd255358fcf36c4519d4d7698a97c2d16200095',
+
+	-- Prefixes used within the mesh. Both are required.
+		prefix4 = '10.80.0.0/16',
+		prefix6 = 'fdd3:5d20:b5dd:fe00::/64',
+
+	-- Wireless configuration for 2.4 GHz interfaces.
+	wifi24 = {
+		-- Wireless channel.
+	    	channel = 1,
+
+	    	-- ESSID used for client network.
+	    	ap = {
+	        	ssid = 'Freifunk-Neustadt.de',
+	    	},
+	  	mesh = {
+	    		id = '02:d1:11:37:fd:49',
+	    		mcast_rate = 12000,
+	  	},
+	},
+	-- Wireless configuration for 5 GHz interfaces.
+	-- This should be equal to the 2.4 GHz variant, except
+	-- for channel and htmode.
+	wifi5 = {
+		channel = 44,
+		outdoor_chanlist = '100-140',
+		ap = {
+ 	     	  	ssid = 'Freifunk-Neustadt.de',
+ 	   	},
+	  	mesh = {
+   	 		id = '02:d1:11:37:fd:69',
+   	 		mcast_rate = 12000,
+  		},
+	},
+
+	-- The next node feature allows clients to always reach the node it is
+	-- connected to using a known IP address.
+	next_node = {
+		name= { 'nextnode', 'nn' },
+	    	-- anycast IPs of all nodes
+	    	ip4 = '10.80.2.255',
+	    	ip6 = 'fdd3:5d20:b5dd:fe00::1',
+	    	--ip6 = 'fdff::ff',
+
+		-- anycast MAC of all nodes
+	    	mac = '16:42:ca:fe:be:ef',
+	},
+
+	  -- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
+	  -- what these options do.
+
+        mesh_vpn = {
+                mtu = 1420,
+                wireguard = {
+                        enabled = 'true',
+                        iface = 'mesh-vpn',
+                        iprange = '10.3', --must be a /16!!
+                        limit = '1', -- actually unused
+                        gretapip = '10.3.0.2',
+                        peers = {
+                                       {
+                                               publickey ='N9uF5Gg1B5AqWrE9IuvDgzmQePhqhb8Em/HrRpAdnlY=',
+                                               endpoint ='ffkwsn01.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='liatbdT62FbPiDPHKBqXVzrEo6hc5oO5tmEKDMhMTlU=',
+                                               endpoint ='ffkwsn02.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='xakSGG39D1v90j3Z9eVWzojh6nDbnsVUc/RByVdcKB0=',
+                                               endpoint ='ffkwsn03.freifunk-koenigswinter.de:30020',
+                                        },
+                        },
+                },
+        },
+}
+

domains/neuwied.conf

@@ -0,0 +1,91 @@
+{   
+	domain_names = {     
+		neuwied = 'Neuwied'   
+	},
+
+	mesh = 
+	{       
+		vxlan = true,
+ 		batman_adv = {           
+			routing_algo = 'BATMAN_IV',       
+			gw_sel_class = 3,
+		},
+	},
+
+	-- Domain Seed
+		domain_seed = 'e0e05b36828f33c3e7f4946d5bd255358fcf36c4519d4d7698a97c2d16200095',
+
+	-- Prefixes used within the mesh. Both are required.
+		prefix4 = '10.80.0.0/16',
+		prefix6 = 'fdd3:5d20:b5dd:fe00::/64',
+
+	-- Wireless configuration for 2.4 GHz interfaces.
+	wifi24 = {
+		-- Wireless channel.
+	    	channel = 1,
+
+	    	-- ESSID used for client network.
+	    	ap = {
+	        	ssid = 'Freifunk-Neuwied.de',
+	    	},
+	  	mesh = {
+	    		id = '02:d1:11:37:fd:49',
+	    		mcast_rate = 12000,
+	  	},
+	},
+	-- Wireless configuration for 5 GHz interfaces.
+	-- This should be equal to the 2.4 GHz variant, except
+	-- for channel and htmode.
+	wifi5 = {
+		channel = 44,
+		outdoor_chanlist = '100-140',
+		ap = {
+ 	     	  	ssid = 'Freifunk-Neuwied.de',
+ 	   	},
+	  	mesh = {
+   	 		id = '02:d1:11:37:fd:69',
+   	 		mcast_rate = 12000,
+  		},
+	},
+
+	-- The next node feature allows clients to always reach the node it is
+	-- connected to using a known IP address.
+	next_node = {
+		name= { 'nextnode', 'nn' },
+	    	-- anycast IPs of all nodes
+	    	ip4 = '10.80.2.255',
+	    	ip6 = 'fdd3:5d20:b5dd:fe00::1',
+	    	--ip6 = 'fdff::ff',
+
+		-- anycast MAC of all nodes
+	    	mac = '16:42:ca:fe:be:ef',
+	},
+
+	  -- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
+	  -- what these options do.
+
+        mesh_vpn = {
+                mtu = 1420,
+                wireguard = {
+                        enabled = 'true',
+                        iface = 'mesh-vpn',
+                        iprange = '10.3', --must be a /16!!
+                        limit = '1', -- actually unused
+                        gretapip = '10.3.0.2',
+                        peers = {
+                                       {
+                                               publickey ='N9uF5Gg1B5AqWrE9IuvDgzmQePhqhb8Em/HrRpAdnlY=',
+                                               endpoint ='ffkwsn01.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='liatbdT62FbPiDPHKBqXVzrEo6hc5oO5tmEKDMhMTlU=',
+                                               endpoint ='ffkwsn02.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='xakSGG39D1v90j3Z9eVWzojh6nDbnsVUc/RByVdcKB0=',
+                                               endpoint ='ffkwsn03.freifunk-koenigswinter.de:30020',
+                                        },
+                        },
+                },
+        },
+}

domains/rheinbreitbach.conf

@@ -0,0 +1,91 @@
+{   
+	domain_names = {     
+		rheinbreitbach = 'Rheinbreitbach'   
+	},
+
+	mesh = 
+	{       
+		vxlan = true,
+ 		batman_adv = {           
+			routing_algo = 'BATMAN_IV',       
+			gw_sel_class = 3,
+		},
+	},
+
+	-- Domain Seed
+		domain_seed = 'e0e05b36828f33c3e7f4946d5bd255358fcf36c4519d4d7698a97c2d16200095',
+
+	-- Prefixes used within the mesh. Both are required.
+		prefix4 = '10.80.0.0/16',
+		prefix6 = 'fdd3:5d20:b5dd:fe00::/64',
+
+	-- Wireless configuration for 2.4 GHz interfaces.
+	wifi24 = {
+		-- Wireless channel.
+	    	channel = 1,
+
+	    	-- ESSID used for client network.
+	    	ap = {
+	        	ssid = 'Freifunk-Rheinbreitbach.de',
+	    	},
+	  	mesh = {
+	    		id = '02:d1:11:37:fd:49',
+	    		mcast_rate = 12000,
+	  	},
+	},
+	-- Wireless configuration for 5 GHz interfaces.
+	-- This should be equal to the 2.4 GHz variant, except
+	-- for channel and htmode.
+	wifi5 = {
+		channel = 44,
+		outdoor_chanlist = '100-140',
+		ap = {
+ 	     	  	ssid = 'Freifunk-Rheinbreitbach.de',
+ 	   	},
+	  	mesh = {
+   	 		id = '02:d1:11:37:fd:69',
+   	 		mcast_rate = 12000,
+  		},
+	},
+
+	-- The next node feature allows clients to always reach the node it is
+	-- connected to using a known IP address.
+	next_node = {
+		name= { 'nextnode', 'nn' },
+	    	-- anycast IPs of all nodes
+	    	ip4 = '10.80.2.255',
+	    	ip6 = 'fdd3:5d20:b5dd:fe00::1',
+	    	--ip6 = 'fdff::ff',
+
+		-- anycast MAC of all nodes
+	    	mac = '16:42:ca:fe:be:ef',
+	},
+
+	  -- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
+	  -- what these options do.
+
+        mesh_vpn = {
+                mtu = 1420,
+                wireguard = {
+                        enabled = 'true',
+                        iface = 'mesh-vpn',
+                        iprange = '10.3', --must be a /16!!
+                        limit = '1', -- actually unused
+                        gretapip = '10.3.0.2',
+                        peers = {
+                                       {
+                                               publickey ='N9uF5Gg1B5AqWrE9IuvDgzmQePhqhb8Em/HrRpAdnlY=',
+                                               endpoint ='ffkwsn01.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='liatbdT62FbPiDPHKBqXVzrEo6hc5oO5tmEKDMhMTlU=',
+                                               endpoint ='ffkwsn02.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='xakSGG39D1v90j3Z9eVWzojh6nDbnsVUc/RByVdcKB0=',
+                                               endpoint ='ffkwsn03.freifunk-koenigswinter.de:30020',
+                                        },
+                        },
+                },
+        },
+}

domains/thw.conf

@@ -0,0 +1,91 @@
+{   
+	domain_names = {     
+		thw = 'THW'   
+	},
+
+	mesh = 
+	{       
+		vxlan = true,
+ 		batman_adv = {           
+			routing_algo = 'BATMAN_IV',       
+			gw_sel_class = 3,
+		},
+	},
+
+	-- Domain Seed
+		domain_seed = 'e0e05b36828f33c3e7f4946d5bd255358fcf36c4519d4d7698a97c2d16200095',
+
+	-- Prefixes used within the mesh. Both are required.
+		prefix4 = '10.80.0.0/16',
+		prefix6 = 'fdd3:5d20:b5dd:fe00::/64',
+
+	-- Wireless configuration for 2.4 GHz interfaces.
+	wifi24 = {
+		-- Wireless channel.
+	    	channel = 1,
+
+	    	-- ESSID used for client network.
+	    	ap = {
+	        	ssid = 'Freifunk-THW.de',
+	    	},
+	  	mesh = {
+	    		id = '02:d1:11:37:fd:49',
+	    		mcast_rate = 12000,
+	  	},
+	},
+	-- Wireless configuration for 5 GHz interfaces.
+	-- This should be equal to the 2.4 GHz variant, except
+	-- for channel and htmode.
+	wifi5 = {
+		channel = 44,
+		outdoor_chanlist = '100-140',
+		ap = {
+ 	     	  	ssid = 'Freifunk-THW.de',
+ 	   	},
+	  	mesh = {
+   	 		id = '02:d1:11:37:fd:69',
+   	 		mcast_rate = 12000,
+  		},
+	},
+
+	-- The next node feature allows clients to always reach the node it is
+	-- connected to using a known IP address.
+	next_node = {
+		name= { 'nextnode', 'nn' },
+	    	-- anycast IPs of all nodes
+	    	ip4 = '10.80.2.255',
+	    	ip6 = 'fdd3:5d20:b5dd:fe00::1',
+	    	--ip6 = 'fdff::ff',
+
+		-- anycast MAC of all nodes
+	    	mac = '16:42:ca:fe:be:ef',
+	},
+
+	  -- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
+	  -- what these options do.
+
+        mesh_vpn = {
+                mtu = 1420,
+                wireguard = {
+                        enabled = 'true',
+                        iface = 'mesh-vpn',
+                        iprange = '10.3', --must be a /16!!
+                        limit = '1', -- actually unused
+                        gretapip = '10.3.0.2',
+                        peers = {
+                                       {
+                                               publickey ='N9uF5Gg1B5AqWrE9IuvDgzmQePhqhb8Em/HrRpAdnlY=',
+                                               endpoint ='ffkwsn01.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='liatbdT62FbPiDPHKBqXVzrEo6hc5oO5tmEKDMhMTlU=',
+                                               endpoint ='ffkwsn02.freifunk-koenigswinter.de:30020',
+                                       },
+                                       {
+                                               publickey ='xakSGG39D1v90j3Z9eVWzojh6nDbnsVUc/RByVdcKB0=',
+                                               endpoint ='ffkwsn03.freifunk-koenigswinter.de:30020',
+                                        },
+                        },
+                },
+        },
+}

domains/unkel.conf

@@ -0,0 +1,91 @@
+{   
+	domain_names = {     
+		unkel = 'Unkel'   
+	},
+
+	mesh = 
+	{       
+		vxlan = true,
+ 		batman_adv = {           
+			routing_algo = 'BATMAN_IV',       
+			gw_sel_class = 3,
+		},
+	},
+
+	-- Domain Seed
+		domain_seed = 'e0e05b36828f33c3e7f4946d5bd255358fcf36c4519d4d7698a97c2d16200095',
+
+	-- Prefixes used within the mesh. Both are required.
+		prefix4 = '10.80.0.0/16',
+		prefix6 = 'fdd3:5d20:b5dd:fe00::/64',
+
+	-- Wireless configuration for 2.4 GHz interfaces.
+	wifi24 = {
+		-- Wireless channel.
+	    	channel = 1,
+
+	    	-- ESSID used for client network.
+	    	ap = {
+	        	ssid = 'Freifunk-Unkel.de',
+	    	},
+	  	mesh = {
+	    		id = '02:d1:11:37:fd:49',
+	    		mcast_rate = 12000,
+	  	},
+	},
+	-- Wireless configuration for 5 GHz interfaces.
+	-- This should be equal to the 2.4 GHz variant, except
+	-- for channel and htmode.
+	wifi5 = {
+		channel = 44,
+		outdoor_chanlist = '100-140',
+		ap = {
+ 	     	  	ssid = 'Freifunk-Unkel.de',
+ 	   	},
+	  	mesh = {
+   	 		id = '02:d1:11:37:fd:69',
+   	 		mcast_rate = 12000,
+  		},
+	},
+
+	-- The next node feature allows clients to always reach the node it is
+	-- connected to using a known IP address.
+	next_node = {
+		name= { 'nextnode', 'nn' },
+	    	-- anycast IPs of all nodes
+	    	ip4 = '10.80.2.255',
+	    	ip6 = 'fdd3:5d20:b5dd:fe00::1',
+	    	--ip6 = 'fdff::ff',
+
+		-- anycast MAC of all nodes
+	    	mac = '16:42:ca:fe:be:ef',
+	},
+
+	-- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
+	-- what these options do.
+
+	mesh_vpn = {
+        	mtu = 1420,
+        	wireguard = {
+                	enabled = 'true',
+               		iface = 'mesh-vpn',
+                	iprange = '10.3', --must be a /16!!
+                	limit = '1', -- actually unused
+                	gretapip = '10.3.0.2',
+			peers = {
+                         	       {
+                         	               publickey ='N9uF5Gg1B5AqWrE9IuvDgzmQePhqhb8Em/HrRpAdnlY=',
+                         	               endpoint ='ffkwsn01.freifunk-koenigswinter.de:30020',
+                         	       },
+                         	       {
+                         	               publickey ='liatbdT62FbPiDPHKBqXVzrEo6hc5oO5tmEKDMhMTlU=',
+                         	               endpoint ='ffkwsn02.freifunk-koenigswinter.de:30020',
+                         	       },
+                         	       {
+					       publickey ='xakSGG39D1v90j3Z9eVWzojh6nDbnsVUc/RByVdcKB0=',
+					       endpoint ='ffkwsn03.freifunk-koenigswinter.de:30020',
+                                	},
+                        },
+        	},
+	},
+}

i18n/de.po

@@ -0,0 +1,36 @@
+sgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: PACKAGE VERSION\n"
+"PO-Revision-Date: 2015-03-19 20:28+0100\n"
+"Last-Translator: Matthias Schiffer <mschiffer@universe-factory.net>\n"
+"Language-Team: German\n"
+"Language: de\n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "gluon-config-mode:welcome"
+msgstr ""
+"Willkommen zum Einrichtungsassistenten für deinen neuen"
+"Freifunk-Knoten von Netzwerk Königswinter e.V. Fülle das folgende Formular deinen Vorstellungen "
+"entsprechend aus und sende es ab."
+
+msgid "gluon-config-mode:pubkey"
+msgstr ""
+"Dies ist der öffentliche Schlüssel deines Freifunk-Knotens." 
+""
+
+msgid "gluon-config-mode:reboot"
+msgstr ""
+"<p>Dein Knoten startet gerade neu und wird anschließend versuchen, "
+"sich mit anderen Freifunkknoten in seiner Nähe zu "
+"verbinden. Weitere Informationen zur "
+"Freifunk-Community von Netzwerk Königswinter e.V. findest du auf "
+"<a href=\"https://netzwerk-koenigswinter.de/\">unserer Webseite</a>.</p>"
+"<p>Um zu dieser Konfigurationsseite zurückzugelangen, drücke im normalen "
+"Betrieb für zehn Sekunden den Reset-Button. Das Gerät wird dann im Config "
+"Mode neustarten.</p>"
+"<p>Viel Spaß mit deinem Knoten und der Erkundung von Freifunk!</p>"
+"<p>Vergesst nicht: Freifunk ist mehr als nur Internet.</p>"
+"<p>Be excellent to each other.</p>"

i18n/en.po

@@ -0,0 +1,36 @@
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: PACKAGE VERSION\n"
+"PO-Revision-Date: 2015-03-19 20:28+0100\n"
+"Last-Translator: Matthias Schiffer <mschiffer@universe-factory.net>\n"
+"Language-Team: English\n"
+"Language: en\n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "gluon-config-mode:welcome"
+msgstr ""
+"Welcome to the setup of your Freifunk Node powered by Netzwerk Koenigswinter e.V."
+"If you want to, you can fill out the form."
+
+msgid "gluon-config-mode:pubkey"
+msgstr ""
+"This is your Freifunk node's public key."
+""
+""
+
+
+msgid "gluon-config-mode:reboot"
+msgstr ""
+"<p>The node is currently rebooting and will try to connect to other "
+"nearby Freifunk nodes  after that. "
+"Your can find more information on Freifunk on "
+"<a href=\"https://kbu.freifunk.net/\">our homepage</a>.</p>"
+"<p>To get back to this configuration interface, press the reset button for "
+"10 seconds during normal operation. The device will then reboot into config "
+"mode.</p>"
+"<p>Have fun with your node and exploring the Freifunk network!</p>"
+"<p>And remember: there is more to networking than only the internet.</p>"
+"<p>Be excellent to each other.</p>"

i18n/gluon-site.pot

@@ -0,0 +1,11 @@
+msgid ""
+msgstr "Content-Type: text/plain; charset=UTF-8"
+
+msgid "gluon-config-mode:welcome"
+msgstr ""
+
+msgid "gluon-config-mode:pubkey"
+msgstr ""
+
+msgid "gluon-config-mode:reboot"
+msgstr ""

modules

@@ -0,0 +1,14 @@
+# This file allows specifying additional repositories to use
+# when building gluon.
+#
+# In most cases, it is not required so don't add it.
+
+GLUON_SITE_FEEDS="wgkw fileskw"
+PACKAGES_WGKW_REPO=https://github.com/Netzwerk-Koenigswinter/gluon-mesh-vpn-wireguard.git
+PACKAGES_WGKW_COMMIT=242db55cb43310e5a63c20e5050c76c4abd1adff
+PACKAGES_WGKW_BRANCH=master
+
+PACKAGES_FILESKW_REPO=https://github.com/Netzwerk-Koenigswinter/gluon-ffkw-files.git
+PACKAGES_FILESKW_COMMIT=7494262a42b328253caf977253008d49a77f98ef
+PACKAGES_FILESKW_BRANCH=master
+

site.conf

@@ -0,0 +1,137 @@
+{
+  -- Used for generated hostnames, e.g. freifunk-abcdef123456. (optional)
+  hostname_prefix = 'ffkw-',
+
+  -- Name of the community.
+  site_name = 'Freifunk Koenigswinter',
+
+  -- Shorthand of the community.
+  site_code = 'ffkw',
+
+  default_domain = 'koenigswinter',
+
+  -- Timezone of your community.
+  -- See http://wiki.openwrt.org/doc/uci/system#time_zones
+  timezone = 'CET-1CEST,M3.5.0,M10.5.0/3',
+
+
+  -- List of NTP servers in your community.
+  -- Must be reachable using IPv6!
+  ntp_servers = {
+                'fdd3:5d20:b5dd:fe00::1',
+                'fdd3:5d20:b5dd:fe00::2',
+                'fdd3:5d20:b5dd:fe00::3',
+        },
+
+  -- Wireless regulatory domain of your community.
+  regdom = 'DE',
+
+  autoupdater = {
+    -- Default branch. Don't forget to set GLUON_BRANCH when building!
+    branch = 'stable',
+
+    -- List of branches. You may define multiple branches.
+    branches = {
+      stable = {
+        name = 'stable',
+
+        -- List of mirrors to fetch images from. IPv6 required!
+        mirrors = {
+                'http://[fdd3:5d20:b5dd:fe00::51]/stable/wireguard/sysupgrade',
+        },
+
+        -- Number of good signatures required.
+        -- Have multiple maintainers sign your build and only
+        -- accept it when a sufficient number of them have
+        -- signed it.
+        good_signatures = 1,
+
+        -- List of public keys of maintainers.
+        pubkeys = {
+                'b35dfb30ab9f54064209d9cb6042d6509cdfdd19352798ef6c3fd61787d4008f', -- JohnnyBee
+                '7b6989901962d8a4c4db392facb80271ae545120929d7d23daf2c66c736e5159', -- FatherJenkins
+        },
+      },
+
+      testbranch = {
+        name = 'testbranch',
+
+        -- List of mirrors to fetch images from. IPv6 required!
+        mirrors = {
+                'http://[fdd3:5d20:b5dd:fe00::51]/testbranch/wireguard/sysupgrade',
+        },
+
+        -- Number of good signatures required.
+        -- Have multiple maintainers sign your build and only
+        -- accept it when a sufficient number of them have
+        -- signed it.
+        good_signatures = 1,
+
+        -- List of public keys of maintainers.
+        pubkeys = {
+                'b35dfb30ab9f54064209d9cb6042d6509cdfdd19352798ef6c3fd61787d4008f', -- JohnnyBee
+                '7b6989901962d8a4c4db392facb80271ae545120929d7d23daf2c66c736e5159', -- FatherJenkins
+        },
+      },
+
+      devbranch = {
+        name = 'devbranch',
+
+        -- List of mirrors to fetch images from. IPv6 required!
+        mirrors = {
+                'http://[fdd3:5d20:b5dd:fe00::51]/devbranch/wireguard/sysupgrade',
+        },
+
+        -- Number of good signatures required.
+        -- Have multiple maintainers sign your build and only
+        -- accept it when a sufficient number of them have
+        -- signed it.
+        good_signatures = 1,
+
+        -- List of public keys of maintainers.
+        pubkeys = {
+                'b35dfb30ab9f54064209d9cb6042d6509cdfdd19352798ef6c3fd61787d4008f', -- JohnnyBee
+                '7b6989901962d8a4c4db392facb80271ae545120929d7d23daf2c66c736e5159', -- FatherJenkins
+        },
+      },
+
+    },
+  },
+
+--  authorized_keys = {
+--                '',
+--        },
+
+  opkg = {
+        extra = {
+                modules = 'http://[fdd3:5d20:b5dd:fe00::51]/stable/wireguard/modules/gluon-ffkbu-%GR/%S',
+                },
+  },
+
+-- Skip setup mode (config mode) on first boot
+  setup_mode = {
+    skip = false,
+  },
+  config_mode = {
+    hostname = {
+      optional = false,
+      prefill = true,
+    },
+    geo_location = {
+      osm = {
+        center = {
+          lat = 50.680035738,
+          lon = 7.191925049,
+        },
+        zoom = 13,
+      },
+    },
+    remote_login = {
+      show_password_form = true,
+      min_password_length = 8,
+    },
+    owner = {
+      obligatory = true,
+    },
+  },
+}

site.mk

@@ -0,0 +1,210 @@
+##      gluon site.mk makefile example
+
+##	GLUON_FEATURES
+#		Specify Gluon features/packages to enable;
+#		Gluon will automatically enable a set of packages
+#		depending on the combination of features listed
+##      GLUON_SITE_PACKAGES
+#               specify gluon/openwrt packages to include here
+#               The gluon-mesh-batman-adv-* package must come first because of the dependency resolution
+
+GLUON_FEATURES := \
+        autoupdater \
+        config-mode-geo-location-osm \
+        ebtables-filter-multicast \
+        ebtables-filter-ra-dhcp \
+        ebtables-limit-arp \
+        mesh-batman-adv-15 \
+        respondd \
+        status-page \
+        web-advanced \
+        web-private-wifi \
+        web-wizard \
+	config-mode-domain-select
+         
+GLUON_SITE_PACKAGES := \
+        haveged \
+        iptables \
+        iwinfo \
+        gluon-ffkw-files \
+        gluon-mesh-vpn-wireguard
+        
+GLUON_DEPRECATED=full
+GLUON_MULTIDOMAIN=1
+
+# basic support for USB stack
+USB_PACKAGES_BASIC := \
+        kmod-usb-core \
+        kmod-usb2
+
+# storage support for USB devices
+USB_PACKAGES_STORAGE := \
+        block-mount \
+        blkid \
+        kmod-fs-ext4 \
+        kmod-fs-vfat \
+        kmod-usb-storage \
+        kmod-usb-storage-extras \
+        kmod-nls-cp1250 \
+        kmod-nls-cp1251 \
+        kmod-nls-cp437 \
+        kmod-nls-cp775 \
+        kmod-nls-cp850 \
+        kmod-nls-cp852 \
+        kmod-nls-cp866 \
+        kmod-nls-iso8859-1 \
+        kmod-nls-iso8859-13 \
+        kmod-nls-iso8859-15 \
+        kmod-nls-iso8859-2 \
+        kmod-nls-koi8r \
+        kmod-nls-utf8 \
+        swap-utils
+
+# network support for USB devices
+USB_PACKAGES_NET := \
+        kmod-mii \
+        kmod-nls-base \
+        kmod-usb-net \
+        kmod-usb-net-asix \
+        kmod-usb-net-asix-ax88179 \
+        kmod-usb-net-cdc-eem \
+        kmod-usb-net-cdc-ether \
+        kmod-usb-net-cdc-mbim \
+        kmod-usb-net-cdc-ncm \
+        kmod-usb-net-cdc-subset \
+        kmod-usb-net-dm9601-ether \
+        kmod-usb-net-hso \
+        kmod-usb-net-huawei-cdc-ncm \
+        kmod-usb-net-ipheth \
+        kmod-usb-net-kalmia \
+        kmod-usb-net-kaweth \
+        kmod-usb-net-mcs7830 \
+        kmod-usb-net-pegasus \
+        kmod-usb-net-qmi-wwan \
+        kmod-usb-net-rndis \
+        kmod-usb-net-sierrawireless \
+        kmod-usb-net-smsc95xx
+# broken
+#       kmod-usb-net-rtl8150 \
+#       kmod-usb-net-rtl8152 \
+# network support for PCI devices
+PCI_PACKAGES_NET := \
+        kmod-3c59x \
+        kmod-e100 \
+        kmod-e1000 \
+        kmod-e1000e \
+        kmod-forcedeth \
+        kmod-natsemi \
+        kmod-ne2k-pci \
+        kmod-pcnet32 \
+        kmod-r8169 \
+        kmod-sis900 \
+        kmod-sky2 \
+        kmod-tg3 \
+        kmod-tulip \
+        kmod-via-rhine \
+        kmod-8139cp
+# broken
+#       kmod-ixgbe \
+#       kmod-r8139too \
+# additional packages
+TOOLS_PACKAGES := \
+        iperf \
+        socat \
+        tcpdump \
+        usbutils \
+        vnstat
+# broken
+#       pciutils \
+#
+#
+# $(GLUON_TARGET) specific settings:
+#
+
+# x86-generic
+ifeq ($(GLUON_TARGET),x86-generic)
+# support the usb stack on x86 devices
+# and add a few common USB and PCI NICs
+GLUON_SITE_PACKAGES += \
+        kmod-usb-hid \
+        kmod-hid-generic \
+        $(USB_PACKAGES_BASIC) \
+        $(USB_PACKAGES_STORAGE) \
+        $(USB_PACKAGES_NET) \
+        $(PCI_PACKAGES_NET) \
+        $(TOOLS_PACKAGES)
+endif
+
+# x86-64
+ifeq ($(GLUON_TARGET),x86-64)
+# support the usb stack on x86-64 devices
+# and add a few common USB and PCI NICs
+GLUON_SITE_PACKAGES += \
+        kmod-usb-hid \
+        kmod-hid-generic \
+        $(USB_PACKAGES_BASIC) \
+        $(USB_PACKAGES_STORAGE) \
+        $(USB_PACKAGES_NET) \
+        $(PCI_PACKAGES_NET) \
+        $(TOOLS_PACKAGES)
+endif
+ifeq ($(GLUON_TARGET),x86-kvm_guest)
+GLUON_SITE_PACKAGES += \
+        $(TOOLS_PACKAGES)
+endif
+
+#ar71xx-generic
+GLUON_tp-link-tl-wr842n-nd-v3_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_tp-link-tl-wr1043n-nd-v2_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_tp-link-tl-wr1043n-nd-v3_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_tp-link-tl-wr1043n-nd-v4_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_tp-link-tl-wr1043n-v5_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_tp-link-tl-wdr4300-v1_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_tp-link-tl-wr2543n-nd-v1_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_linksys-wrt160nl_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_d-link-dir-825-rev-b1_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_d-link-dir-505-rev-a1_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_d-link-dir-505-rev-a2_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_gl-inet-6408a-v1_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_gl-inet-6416a-v1_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_netgear-wndr3700_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_netgear-wndr3700v2_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_netgear-wndr3700v4_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_buffalo-wzr-hp-g450h_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_buffalo-wzr-hp-g300nh_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_tp-link-archer-c7-v2_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+GLUON_tp-link-archer-c7-v4_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+
+#mpc85xx-generic
+GLUON_tp-link-tl-wdr4900-v1_SITE_PACKAGES := $(USB_PACKAGES_BASIC) $(TOOLS_PACKAGES) $(USB_PACKAGES_STORAGE)
+
+##      DEFAULT_GLUON_RELEASE
+#               version string to use for images
+#               gluon relies on
+#                       opkg compare-versions "$1" '>>' "$2"
+#               to decide if a version is newer or not.
+
+#DEFAULT_GLUON_RELEASE := 0.6+mstr$(shell date '+%Y%m%d')
+DEFAULT_GLUON_RELEASE ?= v2019.1.1-Wireguard
+
+
+##      GLUON_RELEASE
+#               call make with custom GLUON_RELEASE flag, to use your own release version scheme.
+#               e.g.:
+#                       $ make images GLUON_RELEASE=23.42+5
+#               would generate images named like this:
+#                       gluon-ff%site_code%-23.42+5-%router_model%.bin
+
+# Allow overriding the release number from the command line
+GLUON_RELEASE ?= v2019.1.1-Wireguard
+
+# Default priority for updates.
+GLUON_PRIORITY ?= 0
+
+# Languages to include
+GLUON_LANGS ?= en de
+
+# Region settings for ARCHERC7
+GLUON_REGION ?= eu
+
+GLUON_ATH10K_MESH = 11s